Mitsubishi Plastics, Inc.
TECHBARRIER
General Property of "TECHBARRIER"

TECHBARRIER-V, P2, H
Grade V P2 H Method
Base Film OPET
Characterisitics Standard
Clarity		 Humidity barrier
Easy Adhesion
Easy Printing		 High barrier
Boiling
Oxygen Transmission Rate
25, 80%RH		 cc/m2datm 0.70.50.3 JIS K 7126 as Laminated film
Water vapor Transmission Rate
40, 90%RH		 g/m2d 0.70.30.3 JIS K 7129 as Laminated film
Haze % 4.04.04.0 JIS K 7361
Light Transmission Rate % 898987
Elongation Strength MD MPa 220220220 JIS K 7127
Kg/mm2 222222
TD MPa 230230230
Kg/mm2 232323
Elongation MD % 110110110 JIS K 7127
TD % 110110110
Impact Strength J/piece 0.70.70.7 Puncture Test
Kg-cm/piece 777
COF nonSiOx / nonSiOx 0.450.450.45 JIS K 7125
Heat Shrinkage (dry) MD % 1.01.01.0 180, 5 min
TD   -0.1-0.1-0.1
Heat Shrinkage (hot water) MD % --- 95, 5 min
TD   ---
Wet ability SiOx mN/m 54<54<54< JIS K 6768
dyne/cm 54<54<54<

TECHBARRIER- T, TZ, L
Grade T TZ L Method
Base Film OPET
Characterisitics High barrier
Retort		 Retort
Clarity		 Retort
Humidity barrier
Oxygen Transmission Rate
25, 80%RH		 cc/m2datm 0.31.00.5 JIS K 7126 as Laminated film
Water vapor Transmission Rate
40, 90%RH		 g/m2d 0.30.70.3 JIS K 7129 as Laminated film
Haze % 4.04.04.0 JIS K 7361
Light Transmission Rate % 868987
Elongation Strength MD MPa 220220220 JIS K 7127
Kg/mm2 222222
TD MPa 230230230
Kg/mm2 232323
Elongation MD % 110110110 JIS K 7127
TD % 110110110
Impact Strength J/piece 0.70.70.7 Puncture Test
Kg-cm/piece 777
COF nonSiOx / nonSiOx 0.450.450.45 JIS K 7125
Heat Shrinkage (dry) MD % 1.01.01.0 180, 5 min
TD   -0.1-0.1-0.1
Heat Shrinkage (hot water) MD % --- 95, 5 min
TD   ---
Wet ability SiOx mN/m 54<54<54< JIS K 6768
dyne/cm 54<54<54<

TECHBARRIER-NY, NR, S
Grade NY NR S Method
Base Film OPA OPVA
Characterisitics Liquid Sachet
Anti Pinhole		 Retort
Anti Pinhole		 Super High barrier
Oxygen Transmission Rate
25, 80%RH		 cc/m2datm 0.50.5<0.1 JIS K 7126 as Laminated film
Water vapor Transmission Rate
40, 90%RH		 g/m2d 0.70.70.1 JIS K 7129 as Laminated film
Haze % 2.02.01.0 JIS K 7361
Light Transmission Rate % 909086
Elongation Strength MD MPa 260260280 JIS K 7127
Kg/mm2 262628
TD MPa 270270300
Kg/mm2 272730
Elongation MD % 12012090 JIS K 7127
TD % 11011080
Impact Strength J/piece 1.61.60.9 Puncture Test
Kg-cm/piece 16169
COF nonSiOx / nonSiOx 0.450.550.45 JIS K 7125
Heat Shrinkage (dry) MD % 3.03.02.5 180, 5 min
TD   3.03.01.5
Heat Shrinkage (hot water) MD % 1.91.9- 95, 5 min
TD   2.02.0-
Wet ability SiOx mN/m 54<54<54< JIS K 6768
dyne/cm 54<54<54<

The above data is just a test result, but not guaranteed.

Copyright 2002 by Mitsubishi Plastics,Inc. All Rights Reserved.
BACK
Back to HOME